Architectural Control of Hierarchical Nanobelt Superstructures in Catanionic Reverse Micelles

BaXO₄ (X = Mo, W) nanobelts and a variety of hierarchical superstructures assembled from the nanobelts have been synthesized in a catanionic reverse‐micelle system. The effects of various factors, such as the mixing ratio (r) between the anionic and cationic surfactants, the temperature, and the presence of polymeric additives, on the formation of the nanobelts and their hierarchical assembly have been examined in detail. In particular, r has been shown to be powerful in modulating the formation and assembly of the BaMoO₄ and BaWO₄ nanobelts. Architectural control of the penniform nanobelt superstructures has been readily achieved by changing the experimental parameters. A plausible two‐stage growth mechanism has been proposed for the formation of penniform BaXO₄ nanobelt superstructures in catanionic reverse micelles.     

Strategies to increase CdTe solar-cell voltage

There is a significant difference in performance between today's highest efficiency of CdTe solar cells and single-crystal cells of comparable band gap. The largest contribution to this difference is the voltage, where the values for the best CdTe cells are about 230 mV below the best GaAs cells when an appropriate adjustment is made for band gap. CdTe voltage and fill-factor are currently compromised by low recombination lifetime (near 1 ns), low hole density (near 10¹⁴ cm^− 3), and in some cases an excessive back-contact barrier. Numerical simulation is used to evaluate how combinations of lifetime, carrier density, back electron reflection, and interfacial properties affect voltage and cell performance. Two different strategies for improving voltage and performance are explored.     

晶体硅薄膜电池制备技术及研究现状

晶体硅薄膜太阳电池近些年来得到广泛的研究和初步的商业化探索。根据所采用的晶体硅薄膜沉积工艺中温度范围的不同，晶体硅薄膜电池研究可分为高温路线和低温路线两个不同发展方向。本文分别从这两个方向综述了目前国外晶体硅薄膜电池制备技术的最新进展，最新实验室研究结果。报导了晶体硅薄膜电池商业化进展状况，指出了晶体硅薄膜电池实现产业化必须解决的问题。     

Fabrication and Characterization of Two‐Photon Polymerized Features in Colloidal Crystals

The fabrication and characterization of two‐photon polymerized features written within and outside of colloidal crystals is presented. Two‐photon polymerization (TPP) response diagrams are introduced and developed to map the polymerization and damage thresholds for features written via modulated beam rastering. The use of tris[4‐(7‐benzothiazol‐2‐yl‐9,9‐diethylfluoren‐2‐yl)phenyl]amine (AF‐350) as an initiator for TPP is demonstrated for the first time and TPP response diagrams illustrate the polymerization window. These diagrams also demonstrate that the polymerization behavior within and outside of colloidal crystals is similar and electron microscopy reveals nearly identical resolution. Fluorescence confocal microscopy further enables visualization of non‐self‐supporting, three‐dimensional TPP features within self‐assembled photonic crystals. Finally, microspot spectroscopy is collected from a two‐photon feature written within a colloidal crystal and this is compared with simulation.     

Probabilistic Strength Estimates and Reliability of Damaged Parallel Wire Cables

Cable reliability analysis involves the combined evaluation of cable capacity and cable load in a probabilistic manner. Assessment of cable capacity is only possible through visual inspections of the wires, field sampling, laboratory analysis of the degraded wire populations, and analytical techniques. In addition to a brief presentation of cable mechanics and deterministic models that approximate cable strength, this paper discusses inspection methodologies and statistical methods of estimation of the sizes of the degraded wire populations, and wire properties, leading to cable capacities. These capacities are described by probability distributions. The paper also discusses fundamentals of reliability analysis as they apply to bridge cables. Load criteria of present standard specifications (such as AASHTO or other international codes) are not applicable to long-span suspension bridges. The paper discusses criteria of bridge loading and reliability indices for bridge cables. More work is needed in the evaluation of loading for long-span bridges.     

Experimental and Analytical Behavior of Carbon Fiber-Based Rods as Flexural Reinforcement

This paper presents the results of an experimental and analytical comparison of a study on the flexural behavior of concrete beams reinforced with sandblasted carbon fiber-based composite rods. Twelve beams, including three control beams reinforced with steel, were tested for strength, deformation, and failure characteristics. Analytical comparisons included the generation of the theoretical strength and moment curvature relations. Experimental data from pullout tests indicated that bonding of sandblasted rods is not a major concern. However, excessive deformation in achieving the predicted moment capacity could be a limiting factor in the design of these beams.     

Synthesis and Properties of Photoisomerizable Derivatives of Isosorbide and Their Use in Cholesteric Filters

This paper describes the synthesis of photoisomerizable derivatives of isosorbide. These derivatives contain a stilbene or cinnamate moiety and can therefore be used as photoisomerizable chiral compounds in cholesteric liquid‐crystalline mixtures. The reflection wavelength of cholesteric layers made from these mixtures is increased by UV irradiation due to the fact that the Z‐isomers of these derivatives exhibit a lower helical twisting power than the corresponding E‐isomers. The cinnamate derivatives are very suitable for use in cholesteric color filters that find application in liquid‐crystal displays.     

Mixing Center of a Channel

For longitudinally uniform stretches of waterways there is a mixing center for the across-channel location of a steady point source in steady flow, such that complete mixing is achieved as soon as possible and there is no concentration overshoot at either of the two shorelines. A mathematical definition of the mixing center is the zero of the first oscillatory cross-channel diffusion mode. With the shorelines plus four interior data points across the channel, the starting estimate for the mixing center suffices to keep peak shoreline concentrations to within 6% of optimal. For comparison, a source at mid flow gives 18% shoreline concentration overshoot in the test case. Should very high precision be required, the Appendix gives an iterative construction that converges to the first oscillatory diffusion mode.